Tips to Open Your pool Yourslef
Simplii Pools London: Tips to “Springerize” Your Pool
With Spring finally here it’s time to think about preparing your pool for swim season. If you opt to do this yourself, you can save time and expense. Here are a few tips to get you started!
START EARLY
Algae can start to form in your pool at around 60°F which is around 16°C. The fall chemicals that were added have since dissipated giving algae a chance to grow. To keep things less complicated its best if you start opening your pool before the temperature gets too high. This could save you the extra time and money needed to eliminate algae growth preventing a green pool.
Check your Suplies on Hand:
Before opening, gather all the return fittings, skimmer basket, chlorinators, and cartridges. Maintenance supplies could include a leaf rake, wall brush, and hose. Storing these together over the winter makes for easier access in the spring.
You also need to have the proper chemicals on hand such as algaecide to kill existing algae spores and prevent new algae from forming and shock agents to rid the water of organic matter and metal remover. Stain and scale preventer protects your pool surface and equipment from staining and scaling. Your local pool and spa shop usually sells Pool Opening Kits that contains all the necessary chemicals to open your pool.
Check your filter cartridges for loose cloths or any damages. Cartridges typically last 3-4 seasons. Reduced water flow indicates your cartridge is clogged and should be replaced. Keep a spare set of cartridges for openings, or algae issues.
REMOVE YOUR POOL COVER
Before Removing the Cover:
Rake any debris that has collected on top and if needed pump any excess water that has accumulated. Use a submersible pump or siphon using your vacuum hose to get rid of top water. This water is untreated and can be deposited into the city sewer system.
Once Cover has been Removed:
Clean it with a with a brush and cover cleaner. Store in a plastic container. A wall brush can be used for scrubbing the sides or top of safety covers. Store safety covers with the mesh bag that was provided with the cover.
FILL YOUR POOL BEFORE START-UP
Fill the pool to half way up to the skimmer before you start up your system.
Brush down the liner with your pool brush and remove any leaves or debris
Remove all plugs including those in water features, and gizmos from the skimmer, and re-install your return fittings, skimmer basket, chlorinator and cartridges.
EQUIPMENT START-UP
Once Pool is Full, Re-circulate:
Connect chlorinator
Lubricate your o’rings (Unless you did this at pool closing
Prime the pump and start up your equipment.
Check for any potential problems and address them immediately to prevent large repairs later
Once you’ve added your chemicals, let your pool water circulate for 24-48 hours and then
TEST YOUR WATER CHEMISTRY
Bring your water in for testing to make sure it’s safe for swimming and for your equipment. Your local pool and spa shop will provide this service.Improper water chemistry can irritate eyes and skin but can also damage your pool lining, and your pool equipment or even void the warranty on your pool equipment. If you need help hire someone who knows what they are doing. Bring
HIRE A POOL SERVICE FOR OPENINGS
Opening your pool can be a big job and you want to do it right the first time. If opening your pool is not something you want to manage yourself, call a pool maintenance service such as
The Pools Boys (519)-697-6971 dave@poolboyspoolservice.ca
KEEP IT UP!
Pools require weekly and monthly maintenance to clean out debris, check chemical levels, and check equipment is working properly. If you are too busy to keep up with pool maintenance, Pool Boys offers a weekly pool maintenance service to help you keep your pool ready for use throughout the season.